Pollution Prevention case study paper

Unit IV Scholarly Activity

Address all three of the following writing prompts. Your responses to your three chosen prompts should be at least 350 words each. No title page is needed, but be sure to indicate which writing prompts you are addressing at the top of each response. Each response needs its own reference page.

Writing Prompts (respond to all three):

1. Review the Reading Assignment titled as “ in Oregon’s Electronics Industry” by Harding and Jones. In your review, include:

an overview of the article,

benefits of using pollution prevention in the electronics industry,

specific process modifications discussed in the article,

chemical substitutions mentioned in the article,

economics of making the suggested changes, and

reasons companies might not embrace pollution prevention

2. Review the Reading Assignment titled as “Optimal Deployment of Emissions Reduction Technologies for Construction Equipment” by Barl, Zietsman, Quadrifoglio, and Farzaneh. In your review:

Write an overview of the article.

Describe hydrogen enrichment (HE), selective catalytic reduction (SCR), and fuel additive (FA) technologies.

Describe the advantages and disadvantages of HE, SCR, and FA, including a discussion of costs.

Does the computer model do a satisfactory job of determining the best technology? Explain.

What would be your recommendations as far as which technology (HE, SCR, and/or FA) should be used, or should none be used?

3. Review the Reading Assignment titled as “: The State of the Art” by Srivastava and Jozewicz. In your review:

Write an overview of the article.

Describe flue gas desulfurization (FGD) at and why it is used.

Explain the details of one once-through process and one regenerable process.

Summarize the section titled “The MEL [magnesium enhanced slurry] Cost Model.”

Discuss how the article is useful to a .

Conduct an Internet search to explain the concept of Best Available Technology (BAT) and whether any of the FGD processes described in the article are considered BATs.

You are required to use at least your textbook as source material for all of your responses. All sources used, including the textbook, must be referenced; paraphrased and quoted material must have accompanying citations.

Information about accessing the Blackboard Grading Rubric for this assignment is provided below.